Installing DKubeX on Tanzu Cluster

Prerequisites

• The minimum hardware requirements for installing DKubeX on a Tanzu cluster are as follows:

  Hardware Requirement	Version/Details
  CPU	12-16 cores
  RAM	128GB
  Disk	512GB
  NFS (If external NFS server is being used)	1TB- v4.0/4.1

• The minimum software requirements for installing DKubeX on a Tanzu cluster are as follows:

  Software Requirement	Version/Details
  RKE2 with Rancher	v2.7.6
  K8S	v1.26.8 or higher
  OS Version	Ubuntu 22.04
  Network Provider	canal

• You need to open the following range of ports to successfully install and access Rancher and DKubeX.

  Port	Description
  6443	Kubernetes API server
  443	Rancher UI
  22	SSH
  32443	DKubeX UI port
  30000-32767	NodePorts range

• You need to install helm & kubectl on your CPU (installer) node.

  • To install helm, run the commands on the CPU node terminal:

    sudo apt install curl -y
    curl -fsSL -o get_helm.sh https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3
    chmod 700 get_helm.sh
    ./get_helm.sh
    helm version
    

  • To install kubectl, run the commands on the CPU node terminal:

    • Download the latest kubectl release with the command:

      curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl"
      

    • To validate the binary, use the following commands:

      curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl.sha256"
      echo "$(cat kubectl.sha256)  kubectl" | sha256sum --check
      

      If the validation is successful, it should show the following:

      kubectl: OK
      

      If the check fails, sha256 exits with nonzero status and prints output similar to:

      kubectl: FAILED
      sha256sum: WARNING: 1 computed checksum did NOT match
      

    • Install kubectl using the following command:

      sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl
      

    • Test to ensure the version you installed is up-to-date:

      kubectl version --client
      

    Important

    For more information regarding the installation of kubectl, refer to Install and Set Up kubectl on Linux. For more information regarding the installation of helm, refer to Installing Helm.

• Use the following steps to install Docker and rancher on your CPU node:

  • Uninstall all conflicting packages using the command:

    for pkg in docker.io docker-doc docker-compose docker-compose-v2 podman-docker containerd runc; do sudo apt-get remove $pkg; done
    

  • Update the package lists for available software packages by using the following command:

    sudo apt-get update
    

  • Install ca-certificates, curl, and gnupg using the following command:

    sudo apt-get install ca-certificates curl gnupg -y
    

  • To set up the docker apt repository, use the following commands in order:

    Note

    You will only need to do this for the first time installing Docker to a host machine.

    sudo install -m 0755 -d /etc/apt/keyrings
    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
    sudo chmod a+r /etc/apt/keyrings/docker.gpg
    

  • Use the following commands to add the repository to the apt sources:

    echo \
      "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
      $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | \
      sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
    sudo apt-get update
    

  • Install the latest versions of the Docker packages using the command:

    sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin -y
    

  • To test if the installaion is successful, use the following command to run the hello-world image.

    Note

    Running this command will download a test image. The image will then be run in a container followed by a printed confirmation message.

    sudo docker run hello-world
    

Creating a Rancher Cluster

• Once the Docker installation has been completed on the installer node, install Rancher using the command:

  sudo docker run -d --restart=unless-stopped -p 80:80 -p 443:443 --privileged rancher/rancher:stable
  

• Once the Docker and Rancher installation has been completed on the CPU node, you need to log into the Rancher UI and create a Rancher cluster.

  • To log into the Rancher UI, use the following steps:

    • Copy the public IP of the CPU node, paste and open it on your browser. This opens the Rancher configuration page for that node.

      https://<CPU_Node_IP>

    • To find your container ID, use the command on CPU node terminal window:

      sudo docker container ps
      

    • Copy the container ID and replace the <Container_ID> with your ID and run the following comand This will provide you with the password for Rancher for that node.

      sudo docker logs <Container_ID> 2>&1 | grep "Bootstrap Password:"
      

    • Once you obtain the Bootstrap Password, copy it and paste it in the space provided for the password in the Rancher page.

    • Create a new password on the next screen and check the boxes provided below the Server URL space & click on the Continue button. This will open the Rancher dashboard for the node.

  • Once you are logged into the Rancher UI, follow the steps provided below to create a RKE2 cluster.

    • In the Rancher dashboard, click on the Create option to create an RKE2 Cluster.

    • Select the Custom option provided at the bottom of the list to create a custom cluster.

    • Provide the Cluster with a name. Optionally you can provide a description for the cluster.

    • Choose the Networking option in the Cluster Configuration list of options provided on the left side of the page.

      • On the Addressing section, provide cluster CIDR from a private network.

      Note

      You can choose cluster CIDR from any of the following classes.

      • 192.168.255.255 (Class C)

      • 172.16.255.255 to 172.31.255.255 (class B)

      • 10.255.255.255 (Class A)

    • Choose the Advanced option in the Cluster Configuration list of options provided on the left of the page.

    • Click on the Add Argument option then copy the line provided below & paste it in the space provided. Once you have done so, click on the Create option provided on the bottom right corner of the page. This will start provisioning the cluster.

      max-pods=250
      

  • On the dashboard page of the newly created cluster, click and open the Registration tab.

  • You need to register all the nodes (including the CPU/installer node) to the cluster. Follow the steps given below to do so.

    CPU/Installer nodeWorker node

    • On Step 1- Node Role, make sure all the checkboxes (etcd, Control Plane, Worker) are checked.

    • On Step 2- Registration Command, click on the insecure checkbox.

    • Copy the registration command provided and run it on the CPU node terminal. This will start the registration process for the node.

    Note

    Click on the Provisioning Log option to view more details regarding the provisioning process.

  • Wait until the cluster status (shown beside the cluster name) changes to Active. This will take a few minutes. Once it happens, your Tanzu cluster is ready to use.

• You have to add the new kubernetes context for your cluster to your CPU node.

  • Run the following commands on the CPU node terminal:

    mkdir .kube
    cd .kube
    vim config
    

  • On the Rancher Dashboard, in the Clusters option, select the button menu with 3 dots to the right of the Config option. Then select the Copy KubeConfig to Clipboard option from the from the dropdown. Paste the configuration in the config file on your terminal, save the config file and go back to the base directory by running cd.

Attention

The following step should be done at this point only if you are adding GPU nodes to the Tanzu cluster after installing DKubeX on it. If you are installing DKubeX on a Tanzu cluster without GPU nodes, then you can skip this step and proceed with completing the other prerequisites.

• For Tanzu, we’ve to explicitly install the gpu-operator on the CPU node using the below commands. Wait until the GPU operator goes into the running state.

  Note

  This is based on the references given under Rancher Kubernetes Engine 2 section in the following link: Getting Started- NVIDIA GPU Operator 23.9.0 documentation.

  helm repo add nvidia https://helm.ngc.nvidia.com/nvidia
  helm repo update
  
  helm install gpu-operator --wait -n gpu-operator \
  --create-namespace nvidia/gpu-operator \
  --set toolkit.env[0].name=CONTAINERD_CONFIG \
  --set toolkit.env[0].value=/var/lib/rancher/rke2/agent/etc/containerd/config.toml.tmpl \
  --set toolkit.env[1].name=CONTAINERD_SOCKET \
  --set toolkit.env[1].value=/run/k3s/containerd/containerd.sock \
  --set toolkit.env[2].name=CONTAINERD_RUNTIME_CLASS \
  --set toolkit.env[2].value=nvidia \
  --set toolkit.env[3].name=CONTAINERD_SET_AS_DEFAULT \
  --set-string toolkit.env[3].value=true
  

• Before proceeding with DKubeX installation on the cluster, we need to make sure the below steps are done on ALL the nodes of the Tanzu cluster.

  • Install the nfs-common package to avoid the mount failure issues we might encounter during DKubeX installation.

    sudo apt install nfs-common -y
    

    Note

    This step is as per the discussion in the github rancher threads. Below is the reference for the same.

    rancher/rancher- failed to mount volume backed by NFS in imported K3s cluster #25169

  • To avoid space issues on the device, follow the steps provided below and execute them in ALL the nodes.

    • Open the sysctl.conf file using the following command:

      sudo vim /etc/sysctl.conf
      

    • Update the file-descriptors settings by adding the 3 following lines to the end of the config file in /etc/sysctl.conf, and save the file:

      fs.file-max = 2097152
      fs.inotify.max_user_instances=2097152
      fs.inotify.max_user_watches=1048576
      user.max_user_namespaces=286334455
      

    • Load these new settings by executing the command:

      sudo sysctl -p
      

Attention

If you are installing DKubeX on a Tanzu cluster without GPU/worker nodes, and are going to add GPU nodes later, then please follow the steps given in the Adding GPU Nodes to Tanzu Cluster section after registering the worker node to the Tanzu cluster.

Installing DKubeX

• Add the dkubex-helm repository on your system.

  helm repo add dkubex-helm https://oneconvergence.github.io/dkubex-helm --insecure-skip-tls-verify
  

• Update the helm repository.

  helm repo update
  

• From the Helm repository, get the values.yaml file on your local system by using the following command.

  helm show values dkubex-helm/dkubex > values.yaml
  

  • You need to provide details regarding the version of DKubeX you are going to install and its components in the format provided in the values.yaml file. Open the editor by using the following command:

    vim values.yaml
    

  • You need to fill the following fields (if required) on the values.yaml file:

    values.yaml DescriptionExample

    Field	Description
    image_tag	The version of DKubeX you are going to install. For example, v0.7.9.1.
    admin_password	The password of the admin user of DKubeX.
    registry -> name	The name of the docker registry repository you are going to use for DKubeX installation.
    registry -> username	The username for the docker registry container you are going to use for DKubeX installation.
    registry -> password	The password for the docker registry container you are going to use for DKubeX installation.
    storage_type	The type of storage you are going to use for DKubeX. For example, nfs.
    nfs -> create_server	To create a new local NFS server, set to true, else false.
    nfs -> server	The IP address of the local NFS server.
    nfs -> storage_path	The host path for creating local NFS server.
    nfs -> version	The version of NFS you are going to use. Currently supported versions are 4.1 and 4.0
    hostpath -> storage_path	The host path for creating local NFS server. (For Mac, use this instead of nfs)
    wipe_data	To delete data from the storage, set to true, else false.
    gpu_operator -> enabled	Set as false as we are installing the gpu-operator explicitly earlier.
    kubeflow -> enabled	(Optional)To install Kubeflow for DKubeX, set to true, else false.
    auth -> enabled	To enable OAuth for DKubeX, set to true, else false. You can also set OAuth post-installation. For more information, refer to Setting up Authentication.
    auth -> provider	The OAuth provider you are going to use. Currently 6 OAuth providers are supported: ADFS, Azure, GitHub, Google, Keycloak and Okta.
    auth -> issuer_url	The issuer URL of the OAuth provider you are going to use. (Not required for GitHub OAuth App)
    auth -> client_id	The client ID of the OAuth application you are going to use.
    auth -> client_secret	The client secret of the OAuth application you are going to use.
    auth -> redirect_url	The callback URL of the OAuth application you are going to use.
    auth -> organization	The organization name of which the users are going to be authenticated.
    auth -> email_domain	The email domain of the users who are allowed to be authenticated.
    auth -> azure_tenant	(Only for Azure) The tenant ID of the Azure OAuth application you are going to use.
    auth -> realm	(Only for Keycloak) The realm name of the Keycloak OAuth application you are going to use.
    auth -> allowed_role	(Only for Keycloak) The role name of the Keycloak OAuth application you are going to use.
    auth -> allowed_group	(Only for Keycloak) The group name of the Keycloak OAuth application you are going to use.
    mlflow	(Optional) Provide the details regarding the MLflow server you are going to use.
    flyte -> enabled	(Optional) To install Flyte for DKubeX, set to true, else false. If set to true, you need to provide the details regarding the Flyte account you are going to use.
    node_selector_label	The kubernetes label key that will be added to the worker nodes of the RKE2 cluster.

• You need to add kubernetes labels to all the worker nodes in the RKE cluster on which you are going to install DKubeX. You can do this by running the following command on your terminal. Replace the $node-name$ part with the name of the node you are going to add the label to, $key$ as the key that you are going to use during DKubeX installation, and $value$ as the node type.

  • List all the nodes in the cluster by running the following command on your terminal. Check for the node role column which will tell which nodes have only worker roles.

    kubectl get nodes
    

  • Label the worker nodes with its type by running the following command on your terminal using the node_selector_label key set in the values.yaml earlier.

    CommandExample

    kubectl label node <node-name> <key>=<value>
    

  Note

  The value of the node_selector_label can be used as an input to -t or --type while creating a ray cluster/deploying/finetuning.

• Run Helm installation of DKubeX on your setup by using the following command. Replace the <release-name> part with the version of DKubeX you are going to install.

  helm install -f values.yaml --version 0.1.37 <release-name> dkubex-helm/dkubex --timeout 1500s
  

• You can see and follow the installation logs by running the following commands on your terminal.

  kubectl logs -l job-name=dkubex-installer --follow --tail=-1
  

• You can access your DKubeX setup by going to the following URL on your browser. Replace the <node-ip> part with the IP address of the node on which you have installed DKubeX.

  URL	Example
  https://<node-ip>:32443	https://123.45.67.890:32443

• If you have not added OAuth configuration during installation, going to the previous URL opens the setup with a default user workspace.

Setting up Authentication

Note

This is an optional step provided only in case you have set auth -> enabled to false in the values.yaml file during installation. You can skip this step if you don’t want to set up authentication for your DKubeX setup.

If you have not set up the authentication for your DKubeX setup during installation, you can do it on the DKubeX Admin page by following the steps provided in the following page: Auth.

Note

For more information regarding the admin page, refer to Admin Guide.

• You need to have a pre-created OAuth application.

  Note

  Currently DKubeX supports OAuth App by ADFS, Azure, GitHub, Google, Keycloak and Okta OAuth providers.

• Open the admin page of your DKubeX setup by going to the following URL on your browser. Replace the <node-ip> part with the IP address of the node on which you have installed DKubeX.

  URLExample

  https://<node-ip>:32443/admin
  

Adding GPU Nodes to Tanzu Cluster

Attention

• Please use the steps provided in this section only if you are adding GPU nodes to the Tanzu cluster after installing DKubeX on it.

• Make sure you have registered the worker node to the cluster as specified in the Prerequisites section.

• You need to install helm & kubectl on your CPU (installer) node.

  • To install helm, run the commands on the CPU node terminal:

    sudo apt install curl -y
    curl -fsSL -o get_helm.sh https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3
    chmod 700 get_helm.sh
    ./get_helm.sh
    helm version
    

  • To install kubectl, run the commands on the CPU node terminal:

    • Download the latest kubectl release with the command:

      curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl"
      

    • To validate the binary, use the following commands:

      curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl.sha256"
      echo "$(cat kubectl.sha256)  kubectl" | sha256sum --check
      

      If the validation is successful, it should show the following:

      kubectl: OK
      

      If the check fails, sha256 exits with nonzero status and prints output similar to:

      kubectl: FAILED
      sha256sum: WARNING: 1 computed checksum did NOT match
      

    • Install kubectl using the following command:

      sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl
      

    • Test to ensure the version you installed is up-to-date:

      kubectl version --client
      

    Important

    For more information regarding the installation of kubectl, refer to Install and Set Up kubectl on Linux. For more information regarding the installation of helm, refer to Installing Helm.

• Before proceeding with DKubeX installation on the cluster, we need to make sure the below steps are done on the worker node.

  • Install the nfs-common package to avoid the mount failure issues we might encounter during DKubeX installation.

    sudo apt install nfs-common
    

    Note

    This step is as per the discussion in the github rancher threads. Below is the reference for the same.

    rancher/rancher- failed to mount volume backed by NFS in imported K3s cluster #25169

  • To avoid space issues on the device, follow the steps provided below and execute them on the worker node terminal.

    • Open the sysctl.conf file using the following command:

      sudo vim /etc/sysctl.conf
      

    • Update the file-descriptors settings by adding the 3 following lines to the end of the config file in /etc/sysctl.conf, and save the file:

      fs.file-max = 2097152
      fs.inotify.max_user_instances=2097152
      fs.inotify.max_user_watches=1048576
      user.max_user_namespaces=286334455
      

    • Load these new settings by executing the command:

      sudo sysctl -p
      

• You need to add kubernetes labels to all the worker nodes in the RKE cluster on which you are going to install DKubeX. You can do this by running the following command on your terminal. Replace the <node-name> part with the name of the node you are going to add the label to, <key> as the key that you are going to use during DKubeX installation, and <value> as the node type.

  • List all the nodes in the cluster by running the following command on your terminal. Check for the node role column which will tell which nodes have only worker roles.

    kubectl get nodes
    

  • Label the worker nodes with its type by running the following command on your terminal using the node_selector_label key set in the values.yaml earlier.

    CommandExample

    kubectl label node <node-name> <key>=<value>
    

  Note

  The value of the node_selector_label can be used as an input to -t or --type while creating a ray cluster/deploying/finetuning.

Upgrading DKubeX

To upgrade the setup, use the following steps:

• Update the Helm repository.

  helm repo update
  

• Get the name of the deployed release by running the following command.

  helm list -a
  

• Get the values regarding the current deployed release on a .yaml file by running the following command. Replace the <deployed-release-name> part with the release name you got in the previous step. After that, you need to provide details regarding the version of DKubeX you are going to upgrade to and its components in the format provided in the values-upgrade.yaml file.

  helm get values <deployed-release-name> --all  > values-upgrade.yaml
  

• Run the Helm upgrade job to upgrade the DKubeX version you are using by running the following command. Replace the <deployed-release-name> part with the current release name, and the <new-dkubex-version> with the version you are going to upgrade your DKubeX setup to.

  helm upgrade -f values-upgrade.yaml $deployed-release-name$ dkubex-helm/dkubex --set image_tag=<new-dkube-version> --timeout 1500s
  

• You can see and follow the upgradation logs by running the following commands on your terminal.

  kubectl logs -l job-name=dkubex-upgrade-hook --follow --tail=-1
  

Uninstalling DKubeX

To uninstall the setup, use the following steps:

• Get the name of the deployed release by running the following command.

  helm list -a
  

• Run the following command to uninstall the currently deployed DKubeX setup. Replace the <deployed-release-name> part with the current release name.

  helm uninstall <deployed-release-name> --timeout 900s
  

• You can see and follow the uninstallation logs by running the following commands on your terminal.

  kubectl logs -l job-name=dkubex-uninstaller-hook --follow --tail=-1